unplugged ethernet half way through IFA..

[myksterx]

ello guys this is my problem.

nokia dbox2:

installed \/+ 2.1, but unplugged it by accident.
previously it had \/+ 2.1 Lite, but my friend wanted the full \/+ 2.1.

but me being daft, tripped over ethernet, unplugging it, now box wont boot.

i changed the IP to 192.168.2.4

but i need to know the original \/+ 2.1 Lite or full IP.

so i can attempt a reflash.

[myksterx]

fixed it guys, but ill post what happened:

it came up on the LCD "Beta Research"
then loads of jargon, the loading bar went 1/4 across the LCD then froze.

Nothing on the screen. I attempted IFA the same happened.

bobsylas (cheers pal) just said to unplug it and try again!

worked. just thought ide put it on, silly.. but you could flap if it happened to you! Like i did!!

[myksterx]

anyhow i fixed it with help from troll, ss and nj! cheers guys!

the guys with knowledge came to conclusion it could be out of debug mode (so i poo'd) lol

troll sent me a link to a site, which confirmed it wasnt out of debug..

because the bootloader was only going 1/4 away across the LCD

they came to conclusion that the bootloader was curropt/broken or w.e

so we tried the IFA with a null modem cable and a ethernet..

but when i put the null modem cable into it, it worked straight away, without doign anything at all? which was strange?

i cannot tell you what was wrong but it is fixed now and that is what i did.

if it never fixed itself like that, i was told to flash it again with the null modem plugged in and the ethernet, which should bring back good results

[bob114]

hi
I have had a simular problem ethernet conection stop half wat through flash (left for 10 minuites or so flashed with Ifa ok)
on said box for some reason conection just stops happens alot
as for Ifa just starting when null modem cable was conected If you had not closed ifa down on the pc it will try to flash as soon as dbox is turned on
(found this out when finished flash only turned dbox off not ifa and started dbox again)