hlp

hi, im not sure gow to copy the stuff from old images to new image to get it workin...

thought id try commando out, but still using blade qaud with the fix..

[Derekwd]

You need to get yourself an ftp proggy, ie. flasftp,cuteftp, then have a read in here Setting Up FTP, easy to do when you get your head round it lol.

Derek

[jat]

Originally Posted by Derekwd

You need to get yourself an ftp proggy, ie. flasftp,cuteftp, then have a read in here Setting Up FTP, easy to do when you get your head round it lol.

Derek

Got this from another forum. Worked for me

Right first of all wel use the crossover cable se if we can get her running using that.

First things first, Setting up the PC so that its ready to communicate with the Dbox
1. Open the Control Panel then go into Network Connections
2. You may have a few different connections so disable all of them with the exception of the
connection that you are going to use to communicate with the dbox.
3. Right click on the connection to be used and select "Properties"
4. If using Windows XP turn off the firewall by clicking on the "Advanced" tab, click "Settings"
under "windows firewall" then select "Off" then click "Ok" then click on the "general" tab
4b. If you are using another firewall then be sure to disable it or you won't be able to connect to the Dbox. If you don't know how then stop here.
5. Double click on "internet protocol" to take you into the IP settings
6. Click "Use the following IP addess"
7. Type in 192.168.0.101 into the "IP address box
8. Type in 255.255.255.0 into the "Subnet mask" box if it is not automatically put in
9. Type in 192.168.0.1 into the "Default gateway" box
10. Click "OK" then "OK" again to save the settings

Thats the computer ready now its time to setup the DBox
1. If not already turned on, turn on the Dbox. If there is no image on the box or if "Kein System" is showing on the display then move onto the IFA tutorial.
2. Once booted up press the "Dbox" button on the remote which on mine is 2 below the power button
3. Select "Settings" from the menu that pops up on the screen (should be 4 from the bottom)
4. Select "Network" from the new menu (should be 6 from the top)
5. Select "IP Address" (should be 7 from top) and change it to 192.168.0.100 then press "OK" on the remote
6. Select "Default Gateway" (3 below IP Address) and change it to 192.168.0.1 then press "OK on the remote
7. The "Subnet Mask" (Below "IP Address") should be 255.255.255.0, if it is not change it
accordingly
8. Select "Start/Restart Network Now" (5th from top)
9. Select "Show Active Network Settings" (4th from top)
10. Go "Back" then click "Save Settings" to save everything.
Now that everything is set up its time to communicate with your dbox
1. Connect your Dbox to your PC via the crossover cable.
2. Open your "Network Connections" from the "Control Panel" of your PC
3. Right click on the connection you are using to communicate with your DBox and select Repair(this simply refreshes the connection)
4. Open up Internet Explorer or Flash FXP or whatever program you are using to connect to the DBox
5a. If using Internet explorer simply type FTP://192.168.0.100 into it. If asked, the username is "root" and the password is meant to be "Dbox2" but it could be absolutely anything.
5b. If using Flash FXP click on the lightning flash then quick connect then type 192.168.0.100 into the "Server or URL" box type in "root" as the username and "dbox2" as the password then click "Connect"

Now to upload a nice new Image
1. Get your new image from the usual places if struggling email me, but make sure its the appropriate one. If it is a
single processor box then the 1x image is needed if it has 2 processors then the 2x image is
needed.
2. In internet explorer address bar type ftp://192.168.0.100/tmp again typing in the username and
password if necessary
3. Drag the image from where you have saved it into the window.

Now that the new Image is uploaded its time to flash the box
1. Press "Dbox" on the remote
2. Select "Service Menu" (3rd from bottom) and hit "OK"
3. Select "Image Update" (very last option)
4. Select "Flash Read/Write" (2nd Option)
5. Select "Write One Partition" (2nd From Bottom)
6. Select "Flash without bootloader"
7. Select the Image to flash. If you can't see the image make sure its the correct image and that it has been extracted ie make sure its a .img file and not .rar
8. Select yes if prompted to continue and your finished. The box will reboot and your nearly there

Thats the box flashed with your latest image, now goto dbox-service-makesure cable provider is brute force uk and fast scan is off, then click start scan. That will give you all your channels under one category post bk whn youve done that mate