Stripes - Commando 10 on a 1x Sagem

Blackbeard · 14-02-2009, 10:46 AM

The screen on my 1x Sagem is now 'striped' all the time these are either green stripes or thin parallel lines - the resulting picture is poor.

Is this a tuner on it's way out or are there ucode and / or other settings I can try?

For reference the image is commando 10 (d)

Satsearching · 14-02-2009, 11:10 AM

Normally a ucode problem, try all ucodes or even add some more ucodes to your box.

SS

Blackbeard · 14-02-2009, 01:46 PM

I've tried all three ucodes built into the 1x image - no luck with any of then. Is there a particularly good ucode for a Sagem?

nkw59 · 14-02-2009, 02:01 PM

Quote:

Originally Posted by Blackbeard

I've tried all three ucodes built into the 1x image - no luck with any of then. Is there a particularly good ucode for a Sagem?

Ucode always put it in the bin ! LOL

Blackbeard · 15-02-2009, 05:30 PM

OK - I'll revert to a Blade image.

humforce · 15-02-2009, 08:36 PM

Quote:

Originally Posted by Blackbeard

The screen on my 1x Sagem is now 'striped' all the time these are either green stripes or thin parallel lines - the resulting picture is poor.

Is this a tuner on it's way out or are there ucode and / or other settings I can try?

For reference the image is commando 10 (d)

try changeing the video settings to auto

PaphosAL · 15-02-2009, 10:27 PM

Quote:

Originally Posted by Blackbeard

OK - I'll revert to a Blade image.

m8- you'll probaly see the green stripes on there too, after a reflash, LOL! I've seen this same conundrum on just about every image I've flashed over these past five years, son- and it's a mystery.

A few channel ups and downs- and it's usually gone, and stays gone, until the next reflash. (In my case, usually half a dozen times daily...)

My prognosis: It's the aVia drivers settling in to your box, and no matter what image you flash, you'll invariably see the same stripes, sometimes.

Cheers- AL

dwar · 22-02-2009, 07:55 PM

Quote:

Originally Posted by PaphosAL

m8- you'll probaly see the green stripes on there too, after a reflash, LOL! I've seen this same conundrum on just about every image I've flashed over these past five years, son- and it's a mystery.

A few channel ups and downs- and it's usually gone, and stays gone, until the next reflash. (In my case, usually half a dozen times daily...)

My prognosis: It's the aVia drivers settling in to your box, and no matter what image you flash, you'll invariably see the same stripes, sometimes.

Cheers- AL

if you go dbox/settings/video/video output and change the rgb+cvbs this can sometimes help

14-02-2009, 10:46 AM	#1 (permalink)
Blackbeard Junior Member UkCvs Newbie Join Date: Nov 2008 Posts: 14 iTrader: (0) Casino cash: $10300 Thanks: 8 Thanked 2 Times in 2 Posts Nominated 0 Times in 0 Posts TOTW/F/M Award(s): 0 Groans: 0 Groaned at 0 Times in 0 Posts	Stripes - Commando 10 on a 1x Sagem The screen on my 1x Sagem is now 'striped' all the time these are either green stripes or thin parallel lines - the resulting picture is poor. Is this a tuner on it's way out or are there ucode and / or other settings I can try? For reference the image is commando 10 (d)

14-02-2009, 11:10 AM	#2 (permalink)
Satsearching Yorkshire Git Admin Team-UkCvs Senior Member Join Date: Aug 2008 Location: Here Posts: 1,567 iTrader: (0) Casino cash: $527632 Thanks: 659 Thanked 1,441 Times in 722 Posts Nominated 11 Times in 4 Posts TOTW/F/M Award(s): 4 Groans: 2 Groaned at 0 Times in 0 Posts	Normally a ucode problem, try all ucodes or even add some more ucodes to your box. SS __________________ Download Our Toolbar Now !! DBOX HELPFILE HERE Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, use at your own risk !! NO TO SKY AND F1, BBC WAKE UP! HELLO RTL!

14-02-2009, 01:46 PM	#3 (permalink)
Blackbeard Junior Member UkCvs Newbie Join Date: Nov 2008 Posts: 14 iTrader: (0) Casino cash: $10300 Thanks: 8 Thanked 2 Times in 2 Posts Nominated 0 Times in 0 Posts TOTW/F/M Award(s): 0 Groans: 0 Groaned at 0 Times in 0 Posts	Sagem Ucode I've tried all three ucodes built into the 1x image - no luck with any of then. Is there a particularly good ucode for a Sagem?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15-02-2009, 05:30 PM	#5 (permalink)
Blackbeard Junior Member UkCvs Newbie Join Date: Nov 2008 Posts: 14 iTrader: (0) Casino cash: $10300 Thanks: 8 Thanked 2 Times in 2 Posts Nominated 0 Times in 0 Posts TOTW/F/M Award(s): 0 Groans: 0 Groaned at 0 Times in 0 Posts	OK - I'll revert to a Blade image.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)