Setting Up FTP

[turner123]

Connecting To Your Dbox

First step get yourself a ftp program ie:-flash fxp or best for vista use cute fxp they are available on the net or forums

Dbox Settings

set your box to these settings just check that they are correct as follows:-
Press dbox button on remote
Scroll to settings press ok
Scroll down to network press ok
In the menu you should have the setting of the dbox

Ip address 192.168.1.110
Subnet mask 255.255.255.0
Broadcast 192.168.1.255
Default gateway 192.168.1.1
Dns server 192.168.1.1
If they are the same continue to the next step of setting up your pc
Pc Settings
Step 1 goto were your network connections are


Next follow the diagram below




Once all is exact same as the above close all windows

Now The FTP Setup

(now connect dbox to pc direct with the use of a crossover cable) open your ftp you downloaded open the tab new select new ftp

Enter everything below as in the picture


Now everything is all connected click connect(step3) if everything has gone well you will be connected to the box Now you have full control of the box you can flash update everything you need to do via ftp